BRAND | Wilo |
Product | TOP-Z 25/6 |
Description | Standard wet runner pump |
Internal code | IMP4925911 |
Custom code | 2045522 |
Technical specification | DM PN6/10 Article number 2045522 Features and function - Manual power adjustment with 3 speed levels - Pumps with 1~ motor: - P2 up to 90W: Internal protection against impermissible levels Winding temperatures - P2 = 180W: full motor protection through winding protection contacts in conjunction with trigger device - Pumps with 3~ motor: - P2 up to 90W: Internal protection against impermissible levels Winding temperatures - P2 ≥ 180W: full motor protection with integrated Trigger electronics - Fault light - Contact for central fault message - Rotation control lamp - 3~230V power supply with optional switch plug - Gunmetal or gray cast iron (stainless steel) pump housing depending on the type) - PN 6/PN 10 combination flange (for DN 40 to DN 65) - thermal insulation shells - Additional functions thanks to retrofittable Protect module C: - SSM fault message as a potential-free opener - SBM operating message as a potential-free closer - “Priority Off” tax input from external potential-free Contact (opener) - Blocking detection - Full motor protection with trigger - Failure acknowledgement - Dual pump management (two single pumps in parallel installed): main/reserve mode (automatic fault switching/time-dependent pump replacement) Operational data Pumped medium: water 100% Media temperature: 20.00 °C Requested flow rate: Requested funding amount: Max. media temperature: 65 °C Min. media temperature: 0 °C Min. ambient temperature: 0 °C Max. ambient temperature: 40 °C Temperature range when used in drinking water circulation systems at ambient temperatures of +40°C in Short-term operation 4 h: Temperature range at max. ambient temperature +40 °C: - 20... +110 Maximum operating pressure: 10 bar Maximum allowable total water hardness: 3.57 mmol/l (20 °dH) (3.21 mmol/l (18 °dH) for 20/4 + 25/6) motor data Interference emission: EN 61000-6-3 Noise resistance: EN 61000-6-2 Power connection: 3~400V/50 Hz power consumption: 210 W Max. speed: 2,450 rpm Rated current: 0.45 A Motor protection class: IPX4D Cable connector: 1 x PG13.5 materials Pump housing: 1.4301 Impeller: PPE-GF30 Shaft: oxide ceramic Storage: charcoal, impregnated with synthetic resin installation dimensions Suction-side pipe connection: G 1½, PN 10 Pressure side pipe connection: G 1½, PN 10 Overall length: 180 mm ordering information Make: Wilo Product name: TOP-Z 25/6 DM PN6/10 |
Please Contact Us to Order to offer competitive prices and delivery time for Wilo - TOP-Z 25/6 Standard wet runner pump number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Indonesia Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
GLEITRINGDICHTUNG MG12/43-G60 AQ1EGG SET
KUGELLAGER 6212/2Z-C3 (HT) VP.
GLEITRINGDICHTUNG WJ202/203/204-X SET
2017074 OBSOLETE, REPLACEMENT 122097593!!!
Dichtungssatz
ROTOR-EINHEIT 42/350/2-B D.15/20 +DT.SET
LAUFRAD D.55/77/15 SET
KUGELLAGER 6312/2Z-C3 (HT) VP.
MECHANICAL SEAL
KUPPLUNG MVI DM D14XD14 SET
mechanical seal. MVI6" O/E SET
PUMPENGEH.MVI/MVIS DN32 PN16 1.4301 SET
ROTOR-EINHEIT 42/450/2 +DT.SET
LAUFRAD D.56/95/20 SET
GLEITRINGDICHTUNG MVIL 10b SET
KUGELLAGER 6304/2Z-C3 (HT) VP.
4024729 / MVI 805-1/16/E/3-400-50-2
Hochdruck-Kreiselpumpe
4110157 / MVIE 9503/2-3/16/E/3-2
Hochdruck-Kreiselpumpe
4149100 / MHI 805-1/E/3-400-50-2
Hochdruck-Kreiselpumpe
4071198 / MVI 7006-3/25/E/3-400-50-2
Hochdruck-Kreiselpumpe
2046637 / TOP-Z 40/7 1~ RG PN 6/10
Nassläufer-Standardpumpe
2046642 / TOP-Z 80/10 3~ RG PN 10
Nassläufer-Standardpumpe
2113792 / Stratos-Z 40/1-8 PN 6/10
Nassläufer-Hocheffizienzpumpe
4065553 / Multivert MVIE5205-3/25/E/3-2 OBSOLETE, ALTERNATIVE 4166237 / Helix VE 5206-3/25/E/K!!!
Pumpe
4024713 / MVI 406-1/25/E/3-400-50-2
Hochdruck-Kreiselpumpe
Trockenläufer-Standard-Einzelpumpe
Trockenläufer-Standard-Einzelpumpe
Mechanical seal